After entering the MRJ Cameo layout competition, more to follow, I picked up a Severnside models weighbridge kit. A very nicely etched road vehicle weighbridge kit in brass.
As suggested by the company the kit was built using CA glue, although you can very easily solder the building together, which may be easier, attaching some of the parts that require the usual three hands to hold everything.
A magnifying glass/stand is required, as the kit has an etched door-handle and mount and even with 30-something eyes I needed help locating the etch.
All the etching is very crisp, and the next stage is a priming coat, to see what needs a little tidying up.
I know common wisdom is to use an etch primer, but I’ve been reading on a few US modelling streams about a new airbrush friendly primer, called Stynylrez from Badger. It can be airbrushed straight from the bottle and comes in a range of colours.
A little experimenting should be fun.